What is the best transmission for a LS swap?

Generally speaking, a 700R4/4L60E transmission will fit most applications that originally contained a TH350/TH400,” concurs Winstead, adding,”The 4L80E will not require many modifications in early A-body and F-body applications.” Samples says, “The 4L60 and 4L80 families of transmissions are considered the ‘small-block …

What transmissions are compatible with LS engines?

The LS-series engines share the same basic bellhousing pattern as the original small-block Chevy, so LS engines can be bolted to anything from a 2-speed Powerglide to a 4L80E.

Do you need a new transmission for LS swap?

Depending on which engine you decide to swap into the vehicle, you may need to change the transmission. Generally speaking, the more different the engine is that you are putting in, the higher the chance you’ll need to swap the transmission.

Can you use a 700R4 with a LS motor?

You could use the 700r4 behind a LS motor, but I dont recommend it. I’d sell it and then but a 60e or 80e. Even it if was just rebuilt. The only time that i’d consider running the 700r4 would be if it was a built racing trans which usually runs about $1200.

IT IS IMPORTANT:  Do engineers build machines?

What transmissions work with LS1?

Also, as an aftermarket part, the 4L60E transmission is a popular automatic transmission for Generation III LS motors like the LS1. Generally speaking, a 700R4/4L60E will fit most vehicles initially offered with a TH350 or TH400 transmission. Today, new transmissions capable of handling over 600 ft lbs.

Why is the Powerglide so good?

In fact, a Powerglide can weigh less than a standard manual transmission, provide a direct-drive feel with minimal slippage at the torque converter (or none at all with direct drive), and maintain a relatively low rotating mass. Many Street Stocks, I.M.C.A.

Will a Turbo 400 bolt up to a LS?

“The TH350, TH400, and Powerglide are a direct bolt-on for an LS engine,” explains TCI’s Winstead.

What transmission does a 5.3 have?

5.3L V-8: The 5.3L V-8 utilizes the continuously variable 6-speed automatic transmission as well for sharp handling.

What Chevy transmission is the best?

TH350. Best transmission choice, hands down. The Turbo Hydra-matic 350 was first used in 1969 model cars. It was developed jointly by Buick and Chevrolet to replace the two-speed Super Turbine 300 and aluminum case Powerglide transmissions.

How much HP can a 4L60E handle?

Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support over 1,000 ponies.

Which is better 4L60E or 700R4?

If the transmission has a large 18-pin electronic connector above the passenger side pan rail, it’s a 4L60E, as seen here. If it has a cable connection near the cooler lines on the passenger’s side, that’s a 700R4. The good news is that either way, you win.

IT IS IMPORTANT:  Best answer: Can you flush engine with transmission fluid?

What transmission bolts up to a 5.3 Vortec?

Registered. NV3500 will bolt up, that’s the transmission that came behind some factory 4.8s and 5.3s.

Can you Carburate a LS motor?

A carb equipped LS engine is a very easy way for an old-school Chevy guy to get familiar with the Gen III and IV engine family, and not have to learn the computer tuning. … Thanks to a new array of parts from Holley and its subsidiary companies, swapping in a carb-equipped LS is easier than ever.

What years will a 4L60E transmission fit?

700R4/4L60E/4L65E Year Ranges

Year Ranges Transmission Pan/Filter
1994-1996 4L60E Shallow
1997 4L60E Shallow – Early Deep – Late
1998-2000 4L60E Deep
2001-2003 4L60E/4L65E Deep

What motor does a 4L60E fit?

The front face 4L60-E is natively compatible with either the Chevrolet 90 degree “Small Block” & “Big Block” patterned engines (image, left), including the V6, V8 & I6.

Is a Chevy 5.3 a LS engine?

The cheapest of the LS engine family is the 5.3L truck engine since it came in most of the trucks and SUVs that Chevrolet has produced.