How many watts is a 10 hp motor?

How many watts does a 10 hp motor use?

There 746 watts for every 1 horse power. So a 10 hp motor will need 7680 watts when operating. In one hour the motor will consume 7.680 KWatt hours. If the units are charged at 10 cents each then then that equates to 10x 7.680 / 100 Dollars = 76.8 cents.

How much current does a 10 hp motor need?


HP 1 Phase Amps 3 Phase Amps
115 volt 230 volt
5 56 15.2
7-1/2 80 22
10 100 28

What is 10HP motor?

10 HP Crompton Greaves 3 Phase Electric Motor (Cg), Power: <10 kW

Brand Crompton
Speed 1440
Voltage 440
Usage/Application Industrial
Kw/Hp 7.5/10

What size generator do I need for a 10 hp motor?

Rule of Thumb

Electric Motor Size Minimum Generator Req’d (KVA) by Starting Method
HP KW S.D to KVA Size (Note 2)
6 4.5 12
7.5 5.5 15
10 7.5 20
IT IS IMPORTANT:  Can I sell a car with a blown engine?

How many kW does a 10 hp motor use?

If the motor is loaded to 10 hp, which it probably isn’t, its drawing 746 watts per hp divided by the efficiency, probably about 90% for a motor that size or a total of 8.29 KWH for each hour it runs.

How many kilowatts does a 10 hp motor use?


H.P. 230 V 10 kW @ Full Load
10 8.625

How much energy does a 10 HP motor deliver in 30 minutes 1 HP 746 W?

Assume that 1 horsepower = 746 W I have been working on this for the past hour and have notseen how they get 1.728MJas there answer. HERE IS WHAT I DONE:I have converted 30min to 1800sec. And 10-hp = 7460 W.

How much current would a 1.5 HP 240v motor draw?

The 1.5 HP Baldor motor that turns at 1725 will draw 18 amps according to its name plate.

How many watts is 1 amp 220 volts?

At 220V, 1 amp is equal to 120 watts.

How many amps does a 7.5 kW 3 phase motor draw?

Three Phase Motors

4.0 kW 5.5 8
5.5 kW 7.5 11
7.5 kW 10 15
9.3 kW 12.5 18

What is a 3 phase motor?

A three-phase motor is an electric machine that transforms electric power into mechanical energy by means of electromagnetic interactions.

What is the cost of 1hp motor?

₹6,299.00 FREE Delivery.

How much HorsePower does it take to run a generator?

Select Engine Size (HP)

The rule of thumb is that you need 2 HP to produce 1 kW of electricity. For example, a 50-HP engine is required to produce 25 kW of power.

IT IS IMPORTANT:  Do you add oil to a warm or cold engine?

What happens if you overload a generator?

Overload. If the generator cannot supply enough power to its loads, it will not necessarily shutdown automatically. What it will do is overheat, and maybe fall out of synchronization: both of these conditions can threaten to destroy your generator.

What size generator do I need for my house chart?

Add up the Total Watts to determine how much power your home is likely to use during an outage. Multiply the Total Watts x 1000 to find kilowatts. Multiply kilowatts x 1.25 to add a margin of safety and for future power needs. This is the minimum Generator Capacity required for your home.