Fluid Capacity. 7.40 QTS. All capacities are approximate. When adding, be sure to fill to the approximate level.
How much transmission fluid does a Duramax Allison Transmission hold?
Using transmission funnel fill transmission with 7.4 quarts of Transynd and check level. We recommend this service every 30-40 thousand miles to keep your Allison running its best. Allison does not recommend using a machine to filter or flush the transmission.
How many quarts does a Duramax transmission take?
LB7 Duramax Oil & Fluid Capacity
|Fluid/Oil Type||Capacity – Quarts|
|Engine Oil /w Filter||10 quarts|
|Coolant /w Auto Trans. /w Manual Trans.||See below 20.3 quarts 20.7 quarts|
|Automatic Transmission Refill: After Overhaul:||See Below 7.4 quarts 12.7 quarts|
|ZF-6 Manual Transmission||6.3 quarts|
What kind of transmission fluid does a Duramax Allison Transmission take?
TES 295 is simply a fluid standard that Allison recommended customers and service facilities use in their Allison transmission, a TES 295 spec transmission fluid will meet those stringent standards and deliver optimum performance in your Allison trans.
How often should Allison 1000 transmission fluid be changed?
Although GM recommends the Allison 1000 trans fluid and external filter be changed when the HD’s oil monitor says – or every 25,000 miles for HDs used in severe service – Rod Halsten, a GM master technician in Tuscaloosa, Alabama, says let the trans fluid color and smell be the fluid-change indicators.
How much transmission fluid does a 2003 Chevy DuraMAX take?
21.1 Quarts is the transmission fluid capacity for the 2003 chevy 2500 hd.
How much fluid does a Allison 2000 hold?
7.4 quarts (includes the pint for the spin-on) for the stock (shallow) pan – all you can drain. Torque for the drain plug is 25 foot pounds. Be careful not to overfill the transmission.
What is the best transmission fluid for an Allison 1000?
Best Transmission Fluid For Allison 1000
- Allison Genuine TranSynd Transmission Fluid. …
- Valvoline DEXRON VI Full Synthetic Automatic Transmission Fluid. …
- ACDelco Dexron VI Automatic Transmission Fluid. …
- Castrol TRANSMAX DEX/MERC Automatic Transmission Fluid. …
- Mobil Delvac Syn ATF for Allison 1000.
What is TES 295 transmission fluid?
Kendall SHP 295 is a full synthetic, heavy-duty automatic transmission fluid that offers excellent friction durability to ensure smooth shifting, outstanding low-temperature properties for year-round use and easy shifting in cold weather, as well as rust and corrosion protection.
Which Allison Transmission do I have?
Transmission serial numbers can be found on the Transmission data plate. The serial number of an Allison transmission may be located on the transmission data plate. This can be located on the side of the transmission. This data plate is usually found on the lower rear face of the rear housing.
How many miles is an Allison transmission good for?
With no programmer and standard maintenance you are looking at 200K-400K miles. Not to bad. Or more if taken care of like Toypuller said switch it to a TES-295 rated synthetic fluid and change the external filter regularly and it will last forever.
How often should you change Allison transmission filter?
Beginning with s/n 6510670912 and s/n 6610205144, transmissions equipped with allison high Capacity Filters do not require an initial main Filter change at 5000 miles/8000 km/200 hours.
What Allison transmission is in the Duramax diesel?
Allison 1000 Automatic Transmission
The Allison 1000 was first produced in 1999 by Allison Transmissions. In 2001, GM mated the Allison to its new 6.6L Duramax. The Allison 1000 is arguably one of the most desirable automatic transmissions in its category.